Ghazlan, A. et al. Inspiration from Nature’s body armours—a review of biological and bioinspired composites. Composites B 205, 108513 (2021).
Google Scholar
Peisker, H., Michels, J. & Gorb, S. N. Evidence for a material gradient in the adhesive tarsal setae of the ladybird beetle Coccinella septempunctata. Nat. Commun. 4, 1661 (2013).
Google Scholar
Nazir, A. et al. Multi-material additive manufacturing: a systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials. Mater. Des. 226, 111661 (2023).
Google Scholar
Yang, Y. et al. Recent progress in biomimetic additive manufacturing technology: from materials to functional structures. Adv. Mater. 30, 1706539 (2018).
Google Scholar
Studart, A. R. Additive manufacturing of biologically-inspired materials. Chem. Soc. Rev. 45, 359–376 (2016).
Google Scholar
Montgomery, S. M., Demoly, F., Zhou, K. & Qi, H. J. Pixel-level grayscale manipulation to improve accuracy in digital light processing 3D printing. Adv. Funct. Mater. 33, 2213252 (2023).
Google Scholar
Bomar 3D Printing https://bomar-chem.com/markets/3d-printing (2025).
Carbon 3D Printing Materials for Real-World Applications https://www.carbon3d.com/materials (2025).
Mora, S., Pugno, N. M. & Misseroni, D. 3D printed architected lattice structures by material jetting. Mater. Today 59, 107–132 (2022).
Google Scholar
Skylar-Scott, M. A., Mueller, J., Visser, C. W. & Lewis, J. A. Voxelated soft matter via multimaterial multinozzle 3D printing. Nature 575, 330–335 (2019).
Google Scholar
Kokkinis, D., Bouville, F. & Studart, A. R. 3D printing of materials with tunable failure via bioinspired mechanical gradients. Adv. Mater. 30, 1705808 (2018).
Google Scholar
Zhou, L. et al. Multimaterial 3D printing of highly stretchable silicone elastomers. ACS Appl. Mater. Interfaces 11, 23573–23583 (2019).
Google Scholar
Mirzaali, M. J. et al. Mechanics of bioinspired functionally graded soft–hard composites made by multi-material 3D printing. Compos. Struct. 237, 111867 (2020).
Google Scholar
Buchner, T. J. K. et al. Vision-controlled jetting for composite systems and robots. Nature 623, 522–530 (2023).
Google Scholar
Peng, X. et al. Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices. Addit. Manuf. 40, 101911 (2021).
Google Scholar
Armstrong, C. D. et al. A hybrid additive manufacturing process for production of functional fiber-reinforced polymer composite structures. J. Compos. Mater. 57, 841–850 (2023).
Google Scholar
Ge, Q. et al. 3D printing of highly stretchable hydrogel with diverse UV curable polymers. Sci. Adv. 7, eaba4261 (2021).
Google Scholar
Xu, Z. et al. Additive manufacturing of two-phase lightweight, stiff and high damping carbon fiber reinforced polymer microlattices. Addit. Manuf. 32, 101106 (2020).
Google Scholar
Cheng, J. et al. Centrifugal multimaterial 3D printing of multifunctional heterogeneous objects. Nat. Commun. 13, 7931 (2022).
Google Scholar
Han, D., Yang, C., Fang, N. X. & Lee, H. Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control. Addit. Manuf. 27, 606–615 (2019).
Google Scholar
Yue, L. et al. Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability. Nat. Commun. 14, 1251 (2023).
Google Scholar
Kuang, X. et al. Grayscale digital light processing 3D printing for highly functionally graded materials. Sci. Adv. 5, eaav5790 (2019).
Google Scholar
Huang, S. et al. One-pot ternary sequential reactions for photopatterned gradient multimaterials. Matter 6, 2419–2438 (2023).
Google Scholar
Ma, Y. et al. Multimaterial thermoset synthesis: switching polymerization mechanism with light dosage. ACS Cent. Sci. 10, 2125–2131 (2024).
Google Scholar
Schwartz, J. J. & Boydston, A. J. Multimaterial actinic spatial control 3D and 4D printing. Nat. Commun. 10, 791 (2019).
Google Scholar
Cazin, I. et al. Spatially controlling the mechanical properties of 3D printed objects by dual-wavelength vat photopolymerization. Addit. Manuf. 57, 102977 (2022).
Google Scholar
Rossegger, E. et al. Wavelength selective multi-material 3D printing of soft active devices using orthogonal photoreactions. Macromol. Rapid Commun. 44, 2200586 (2023).
Google Scholar
Gaca, S., Dietliker, K., Rossegger, E. & Schlögl, S. Design of photocurable thiol–epoxy resins for the processing of vitrimers with vat photopolymerisation 3D printing. React. Funct. Polym. 205, 106085 (2024).
Google Scholar
Zhu, C., Gemeda, H. B., Duoss, E. B. & Spadaccini, C. M. Toward multiscale, multimaterial 3D printing. Adv. Mater. 36, 2314204 (2024).
Google Scholar
Chen, J. et al. 3D-printed anisotropic polymer materials for functional applications. Adv. Mater. 34, 2102877 (2022).
Google Scholar
Wallin, T. J., Pikul, J. & Shepherd, R. F. 3D printing of soft robotic systems. Nat. Rev. Mater. 3, 84–100 (2018).
Google Scholar
Abueidda, D. W. et al. Mechanical properties of 3D printed polymeric gyroid cellular structures: experimental and finite element study. Mater. Des. 165, 107597 (2019).
Google Scholar
Farzaneh, A., Pawar, N., Portela, C. M. & Hopkins, J. B. Sequential metamaterials with alternating Poisson’s ratios. Nat. Commun. 13, 1041 (2022).
Google Scholar
Ubaid, J., Schneider, J., Deshpande, V. S., Wardle, B. L. & Kumar, S. Multifunctionality of nanoengineered self-sensing lattices enabled by additive manufacturing. Adv. Eng. Mater. 24, 2200194 (2022).
Google Scholar
Geiger, F., Kebbach, M., Vogel, D., Weissmann, V. & Bader, R. Efficient computer-based method for adjusting the stiffness of subject-specific 3D-printed insoles during walking. Appl. Sci. 13, 3854 (2023).
Google Scholar
Dwyer, C. M. et al. Impact performance of 3D printed spatially varying elastomeric lattices. Polymers 15, 1178 (2023).
Google Scholar
Libanori, R. et al. Stretchable heterogeneous composites with extreme mechanical gradients. Nat. Commun. 3, 1265 (2012).
Google Scholar
Wei, R. et al. Revolutionizing wearable technology: advanced fabrication techniques for body-conformable electronics. npj Flex. Electron. 8, 83 (2024).
Google Scholar
Ehrmann, K. & Barner-Kowollik, C. Colorful 3D printing: a critical feasibility analysis of multi-wavelength additive manufacturing. J. Am. Chem. Soc. 145, 24438–24446 (2023).
Google Scholar
Lu, P. et al. Wavelength-selective light–matter interactions in polymer science. Matter 4, 2172–2229 (2021).
Google Scholar
Boynton, N. R. et al. Accessing pluripotent materials through tempering of dynamic covalent polymer networks. Science 383, 545–551 (2024).
Google Scholar
Ma, Y. et al. Photoswitching cationic and radical polymerizations: spatiotemporal control of thermoset properties. J. Am. Chem. Soc. 143, 21200–21205 (2021).
Google Scholar
Shanmugam, S., Cuthbert, J., Kowalewski, T., Boyer, C. & Matyjaszewski, K. Catalyst-free selective photoactivation of RAFT polymerization: a facile route for preparation of comblike and bottlebrush polymers. Macromolecules 51, 7776–7784 (2018).
Google Scholar
Xu, J., Shanmugam, S., Fu, C., Aguey-Zinsou, K. F. & Boyer, C. Selective photoactivation: from a single unit monomer insertion reaction to controlled polymer architectures. J. Am. Chem. Soc. 138, 3094–3106 (2016).
Google Scholar
Zhao, Y., Ma, M., Lin, X. & Chen, M. Photoorganocatalyzed divergent reversible-deactivation radical polymerization towards linear and branched fluoropolymers. Angew. Chem. Int. Ed. 59, 21470–21474 (2020).
Google Scholar
Frisch, H., Marschner, D. E., Goldmann, A. S. & Barner-Kowollik, C. Wavelength-gated dynamic covalent chemistry. Angew. Chem. Int. Ed. 57, 2036–2045 (2018).
Google Scholar
Van De Walle, M., De Bruycker, K., Blinco, J. P. & Barner-Kowollik, C. Two colour photoflow chemistry for macromolecular design. Angew. Chem. Int. Ed. 59, 14143–14147 (2020).
Google Scholar
Bialas, S. et al. Access to disparate soft matter materials by curing with two colors of light. Adv. Mater. 31, 1807288 (2019).
Google Scholar
Dolinski, N. D. et al. Solution Mask Liquid Lithography (SMaLL) for one-step, multimaterial 3D printing. Adv. Mater. 30, 1800364 (2018).
Google Scholar
Mantri, S. P. & Mantri, S. S. Management of shrinkage stresses in direct restorative light-cured composites: a review. J. Esthet. Restor. Dent. 25, 305–313 (2013).
Google Scholar
Soares, C. J. et al. Polymerization shrinkage stress of composite resins and resin cements—what do we need to know? Braz. Oral Res. 31, e62 (2017).
Google Scholar
Ha, N. S. & Lu, G. A review of recent research on bio-inspired structures and materials for energy absorption applications. Composites B 181, 107496 (2020).
Google Scholar
Guy, N., Giani, O., Blanquer, S., Pinaud, J. & Robin, J.-J. Photoinduced ring-opening polymerizations. Prog. Org. Coat. 153, 106159 (2021).
Google Scholar
Dolinski, N. D. et al. Tough multimaterial interfaces through wavelength-selective 3D printing. ACS Appl. Mater. Interfaces 13, 22065–22072 (2021).
Google Scholar
Arivazhagan, G., Elangovan, A., Shanmugam, R., Vijayalakshmi, R. & Karthick, N. K. Study of molecular interaction in the mixtures of benzene + methyl acrylate/butyl acrylate through dielectric and spectroscopic studies. J. Mol. Liq. 214, 357–363 (2016).
Google Scholar
González, M. G., Cabanelas, J. C. & Baselga, J. in Infrared Spectroscopy—Materials Science, Engineering and Technology (ed. Theophile, T.) 261–284 (IntechOpen, 2012).
Creton, C., Hu, G., Deplace, F., Morgret, L. & Shull, K. R. Large-strain mechanical behavior of model block copolymer adhesives. Macromolecules 42, 7605–7615 (2009).
Google Scholar
Zhang, H. et al. Strain induced nanocavitation and crystallization in natural rubber probed by real time small and wide angle X-ray scattering. J. Polym. Sci. B 51, 1125–1138 (2013).
Google Scholar
Allen, M. J. et al. Multimorphic materials: spatially tailoring mechanical properties via selective initiation of interpenetrating polymer networks. Adv. Mater. 35, 2210208 (2023).
Google Scholar
Rylski, A. K. et al. Polymeric multimaterials by photochemical patterning of crystallinity. Science 378, 211–215 (2022).
Google Scholar
Abraham, A. C., Pauly, H. M. & Haut Donahue, T. L. Deleterious effects of osteoarthritis on the structure and function of the meniscal enthesis. Osteoarthr. Cartil. 22, 275–283 (2014).
Google Scholar
Lu, J. et al. Hierarchically mimicking outer tooth enamel for restorative mechanical compatibility. Nat. Commun. 15, 10182 (2024).
Google Scholar
Miserez, A., Schneberk, T., Sun, C., Zok, F. W. & Waite, J. H. The transition from stiff to compliant materials in squid beaks. Science 319, 1816–1819 (2008).
Google Scholar
Passi, V. et al. Note: Fast and reliable fracture strain extraction technique applied to silicon at nanometer scale. Rev. Sci. Instrum. 82, 116106 (2011).
Google Scholar
